Product Description:
This product is a two-component, neutral room temperature curing silicone sealant. It has excellent weathering resistance, adjustable curing time, fast deep curing, and good adhesion to most building materials such as glass and aluminum.
Features:
◆Neutral glue, no pollution to the environment
◆Quick curing, no corrosion to the surface to be adhered
◆Excellent high and low temperature resistance and weathering resistance
◆No need to have a good adhesion to most building materials

The main purpose:
◆Suitable for insulating glass sealing in construction, transportation, refrigeration and other industries
◆ Various other uses
Products comply with GB24266-2009 standard

Instructions:
◆In order to ensure that the insulating glass sealant has good adhesion, the surface of the bonded material must be clean, dry and free of dirt.
◆ Both automatic production lines and manual production lines can be used. The mass ratio of components A and B is A:B=11-14:1. The user can change the mixing ratio to adjust the curing speed according to actual needs.
◆When mixing glue by hand, avoid air mixing into the glue.

Restricted applications:
This product is not suitable for the following situations:
◆Structural assembly
◆All materials that will ooze oil stains, plasticizers, and solvents
◆Vulcanized or semi-vulcanized rubber
◆Interface that bears the structural strength on the ground
◆Places that have been subjected to friction and physical damage
◆Frosted or wet surface

Precautions:
◆Before use, please do a cohesive test and refer to our company's technical data.
◆B component can react with water in the air, so it should not be exposed to the air for a long time.
◆If the layering of component B is normal, just stir it evenly before use.
◆If you accidentally get into your eyes during use, rinse immediately with water.
◆Do not contact with skin for a long time, avoid contact with children
◆Do not contaminate food, medicine, etc.

Package specifications
The A component and the B component are supplied with a 12:1 mass ratio.
Vat: A component 200L iron drum, inner diameter (567+2) mm
Component B 20L plastic bucket inner diameter (285+2) mm
Middle drum: A 20L plastic drum
Component B 300ml plastic bucket

Storage:
Store in a cool, ventilated, dry place below 28°C. The storage period is 12 months.