Product Description:
This product is a one-component, neutral, room temperature curing silicone sealant with high elasticity, high modulus and high strength. It has good adhesion and weathering resistance.

Features:
♦One component, easy to use
♦High elasticity, high modulus, high strength
♦Neutral glue, no pollution to the environment, no corrosion to the surface to be adhered
♦Excellent high and low temperature resistance and weathering resistance
♦It has good adhesion to glass, aluminum, stone, stainless steel and other building materials without primer
  The main purpose:
♦Structural assembly of building hidden frame curtain wall
♦Adhesive assembly of lighting panels and metal structures of steel structure workshops
♦Installation and sealing of wind pressure resistant glass for automobiles, ships, etc.

Products comply with GB16776 ASTMC920

Surface cleaning:
In order to ensure that the structural sealant has good adhesion, the surface of the material to be adhered must be clean, dry and free of dirt.

Cleaning process:
A clean, lint-free white cloth must be used, and the solvent can be absolute ethanol, acetone, xylene, etc., using the "double cloth wiping method":
1. Wipe the adhered area with a clean, lint-free white cloth soaked in a solvent;
2. Immediately before the solvent evaporates, wipe it off the surface with a second dry, clean, lint-free white cloth;
3. The cleaned area must be completed within 1 hour, otherwise it will be cleaned again;
4. Open flames are strictly prohibited in areas where solvents are used, and good ventilation should be maintained.

Construction glue injection:
In order to prevent the sealant from contaminating the periphery of the joint during construction, protective tape must be used. The construction environment should be above 10^. Use a manual or pneumatic glue gun to inject glue, fill it evenly in the same direction in the seam, and then trim it. When the construction is completed, remove the protective tape.
♦Please do a cohesive test before use and refer to our company's technical data.
♦If it gets into eyes accidentally during use, rinse with water immediately.
♦Do not keep in contact with the skin for a long time, and avoid contact with children.
♦Do not contaminate food, medicine, etc.

Safety instructions:
Please follow the "Glass Curtain Wall Engineering Technical Specification" JGJ102. Before operation, you should carefully read the "Construction Specification for Silicone Structural Sealant" and the product manual, and contact our sales company for these materials. Especially for chrome-plated surface bonding, you must contact the company's technical department before using it for safety testing before using it.

Plastic hard bag: 300ml/piece, 25 pieces/carton, Casing soft bag: 590ml/piece, 20 pieces/carton