It has excellent aging resistance, flexibility, insulation, moisture resistance, shock resistance, corona resistance, and leakage resistance. The fa?ade is non-flowing and can be bonded with steel, glass, PVC, ABS and other materials.
Product Description
HY594 silicone rubber adhesive is a single-component room temperature curing neutral silicone material, resistant to high and low temperatures, excellent aging resistance, flexibility, insulation, moisture resistance, shock resistance, corona resistance, and leakage resistance. The façade is non-flowing and can be bonded with steel, glass, PVC, ABS and other materials. Suitable for all kinds of bonding and sealing of electronic components.
Product Features
Solvent-free, environmentally friendly and low-carbon
Excellent weather resistance, aging resistance, UV resistance
It has sexual insulation, moisture resistance, and earthquake resistance
Suitable for potting and sealing of electronic components, non-corrosive
Curing mechanism
HY594 is a silicone potting material, and its curing mechanism is to react and cure with a curing agent to become an elastic solid. The higher the temperature and the higher the humidity, the faster the curing; the slower the curing speed in the low temperature and low humidity environment.
Resistant to chemical media
The product can be resistant to fresh water, sewage, waste water, calcium carbonate aqueous solution, detergent, low acid, corrosive water solution, etc. for a long time, short-term resistant to mineral oil, vegetable oil, fat, fuel, and not resistant to organic solvents, paint thinners, and high-concentration acids Alkali etc.
Instructions
Clean the surface: clean up the surface of the adherend to remove rust, dust, moisture and oil.
Glue application: Cut the glue nozzle, put it in the bakelite bin, and squeeze the glue onto the cleaned surface to make it evenly distributed.
Bonding and sealing: bonding must be done within 20 minutes after sizing, and the bonded surface can be closed and fixed.
Solidification: curing at room temperature for 24 hours to reach the highest strength. If the temperature is high in summer, the curing will be faster; if the temperature is low in winter, the curing will be slower.
Precautions
Silicone rubber absorbs moisture and cures, and unused glue should be sealed and stored.
Sealed and stored in a cool and dry place, the storage period is 9 months.
Packaging specifications
100ml/tube, 100 tubes/box;
310ml/piece, 50 pieces/box;
2600ml/barrel.
