product description：
HY1213 is oil-resistant silicone sealant, semi-flowing. After curing, it becomes a flexible adhesive layer, which is resistant to high and low temperature (-60-250℃), resistant to aging, and does not corrode the workpiece. It can be used as a supporting glue for various automobile internal combustion engines, diesel engine factories and other manufacturers, and can be used for water and gas oil seals such as gearbox covers, front and rear axles, front and rear end covers on electric power, chemical industry, machinery, and automobiles.
Instructions:
1. Clean the surface: clean the sealed surface to remove rust spots, dust and oil.
2. Glue: Squeeze the glue onto a clean sealing surface, apply a continuous strip of glue, and assemble it within 20 minutes.
3. Solidification: At room temperature, the adhesive layer loses its adhesion in 20-40 minutes, and the 3mm diameter adhesive strip is completely cured within 24 hours.
4. Matters needing attention: The unused glue should be tightened immediately and sealed and stored. When using it again, if there is a little crust at the seal, just remove it, and normal use will not be affected.
5. Storage Storage: sealed and stored in a cool and dry place, the storage period is one year.